having recently had my masterace checked over by a mechanic there came to light a few things that need to be done.
First of all the front tyres are wearing on the outside edges, but there is no data for my vehical on the tracking machine.Is it the same as the Spacecruiser?
New front pads are needed,will I be able to get these from my local motorfactors and does anyone know a part number or will I have to take the old ones off and get them matched?
Lastly the air con belt is just about to snap, I can't find any numbers on it, does anyone a part number for this as well?
My vehicle is a 1988 masterace surf 2.0 TD auto 4WD - (#165) Dave Williams, 20 May 01

tracking is different to Spacecruiser, but 4x4s do scrub the outside edge if driven hard...
Settings for CR30
KPI 12 deg 25min
camber 10 min+- 45
toe 0+- 12 min =+- 1mm
caster 2deg 50 min +- 45
Front pads should be lockheed LP739 or equivalent.
Aircon belt is listed in the motor factor's books as for Liteace Diesel, I think Carina & Camry are same also.
HTH - (#166) david miller, 20 May 01