Does anyone know the part no. for the power steering belt for a 1990 2.0l diesel Townace (2CT Engine)? - (#1527) Simon Green, 29 Nov 01

90916-02122 - (#1528) Ian Dunse, 30 Nov 01

My Power Steering belt has come off. I have obtained a new one but I can't see how to fit it. Looking down from above I can see no access to it. From below by crawling on my back access seems far too resricted, do I have to take up the drivers side floor pan ? If so whats involved with this ? It looks as if I have to disconnect loads of stuff to remove the floor pan. Is there another way ?
Ken. - (#2472) Ken Taylor, 9 Mar 02

Hi Ken, your on the right track & the bad news is this; 1.remove drivers seat. 2.pull back all carpet etc. 3.remove handbrake mechanism complete with handbrake. 4.remove gearlever assembly so only linkages remain, now your ready to remove the drivers side floor pan, once removed you can access the p/s belt. I've recently done mine & its not too bad if you know what has to be removed before you start & how to remove parts etc. Word of advice change all three belts at once because you don't want to have to go through all the hassle again when another belt goes wrong etc. if you need part numbers for the belts, i posted them about 6-8 weeks ago, just scroll down until you see my name, posted under useful part numbers, hope this helps you out!
Regards, Tony. - (#2474) Tony Lloyd-Jones, 9 Mar 02