I tried resetting the CB's to get my front blower to work and it didn't work. THe fan *does* make a click when you slide the switch from off to on...any ideas? Does it mean that the fan is burnt out or something?
BTW I can take my keys out of the ignition while it is running. Ooer. - (#1689) Maria, 23 Dec 01
If you are getting a definite click and CB is not switching off (indicating a short) and the connection to earth is ok, then it could be the resistor rather than the motor relay.
Ian - (#1703) Ian Dunse, 24 Dec 01
If it's the resistor, the fan will still run at full speed.
Probably the motor, a voltage check would verify... - (#1707) david miller, 24 Dec 01
Thanks all for your help.
Now please can anybody tell me how to get to the fan motor to test it? ;) - (#1709) Maria, 25 Dec 01
In behind the glovebox, although most of the tests can be done from the resistor connector that faces out from the heater box, in front of the fan. - (#1713) david miller, 26 Dec 01