Hi,
Does anyone know where I can get a washer jet for my Spacecruiser.
During the freezing weather the nearside must have frozen solid and was blown out whilst traveling when the washer was used. Now the water gushes out that side and not the drivers side.
It is the ballbearing with the holes in it that has dissappeared.
The MOT is due soon. Booh hooh!
Cheers
Terry - (#2367) Terry Hill, 27 Feb 02

Toyota probably use the same ball in most of their washer jets. Try getting one out of your local breakers, and strip the ball out, press it into yours. It's quite a job to remove the assembly from a townie... - (#2368) david miller, 28 Feb 02

To remove the washer jets you have to remove the whole dashboard, this takes about 4 hours. then you remove the holding clip & the washer pipe.refitting is a reversal steps as they say. - (#2377) Arshad Mahmood, 1 Mar 02

thanks guys - (#2385) Terry Hill, 2 Mar 02