Hi Guys,
Please, please, please, can someone out there help me, I am still unable to get a wiring diagram from Toyota so as to get the TEMS sensor on the steering column wired back up correctly, after the alarm fitter pulled out the wiring. The 4 way plug is located to the right of the steering column, behind the lower panel on the dash, to remove this panel, undo the 3 cross slot screws on the bottom edgr#e of the dash panel, this will then drop away, to reveal the steering column, along with a plethora of wires & connectors, the one I'm interested in is located at the very top of this now exposed area, immediately to the right of the steering column, on the wiring loom side it has 3 yellow wires with tracers, and a brown wire, on the sensor side it has a red, black, green & yellow wires, could someone please have a look at theirs & let me know which of the wires correspond with each other on the two mating halves of this plug. I really want to get this sorted by the weekend, as we are going away & would like to have the TEMS working around corners, as well as on braking. Thanks for you help in advance guys, Regards Rob. P.S. thank god the BoK is back up & running!!!!!! - (#2549) Rob Drinkwater, 25 Mar 02

Rob
Red goes to yellow, Black goes to brown, yellow goes to yellow/white. green goes to yellow/black.
HTH
Ian - (#2557) Ian Dunse, 26 Mar 02