Slight Oil Leak thought it was coming from the Sump gasket but seems to be Crankshaft seal .
Does any one Know the Spares Number and what else might need changing onthis job .

Could not see it listed on the sight .

Thanks ...

- (#2941) Nigel Dncer, 14 May 02

My local Toyota dealer is getting this seal for me (in 2 days) this week, plus those for the oil pump and for the cam shaft. Exactly which, if any get changed will depend on how it looks when open. See the Engine/Belts discussions on this Ace Answers website .
I have the part nos. but the dealer always insists on me giving the complete VIN number (including the four letters at the end) and then looks up the parts I want. This seems the safest way - for example he says (!) I have 2 Woodruff keys in my crankshaft pulley whereas other postings here mentioned just one (maybe a design change to stop them coming loose?).
For my '91 QCR30 Townace the front crankshaft seal is about £8 and the oil pump one about £2.

- (#2945) Dave Mason, 15 May 02

All TOYOTA 2CT engines use the same front crank seal, including when it was used in the Avensis, the FAI part number is OS344, and is in stock at most branches of CAMBERLEY AUTO FACTORS, if you are intending to do this job, change the cambelt & all the other drive belts at the same time, it involves taking these off any way & also removing the vehicle floor to get at it all. HTH regards Rob.

- (#2970) Rob Drinkwater, 16 May 02

All have two woodruff keys- one for the pulleys, one for the cambelt pulley

- (#2974) david miller, 17 May 02