I have no breaks on the back ot my 1989 townace. I have taken it to bits today and tried to bleed them is there a load valve or simular device as i can't get any break fluid to come out at the rear pistons. Has anyone got any ideas please.

- (#3653) john heaps, 4 Jul 02

there is a load valve, yes, and it's linked to the axle, so if you jack the car up, no rear brakes...
And there's a bleed nipple on it too.
Centre of the car, follow the rod on the top of the diff forward

- (#3660) david miller, 5 Jul 02

Can anyone help please. I've got no rear breaks on my 1989 Townace. I have stripped it down today. Is there a load valve or simular device as i can't get any break fluid to come out of the rear pistons.
Thanks John H

- (#3654) John Heaps, 4 Jul 02

john,
the space cruiser has a load sensing proportioning and by-pass valve bolted to the rear axle, i assume this is the same on the townace.
hth

- (#3658) Clive, 4 Jul 02