i have looked on ace answers under 4wd but i cant work out how exactly engage the 4wd
please could somone give me a dummies run through
would be greatfull Mick

- (#5457) mick, 9 Sep 02

front hub must be locked. Press 4x4 button.
Presto 4x4. Press 4x4 button, back to 2x4. Might have to accelerate or brake slightly to disengage. Must only use 4x4 on loose surfaces (no centre diff).

To use low ratio if required, be in 4x4, stop, neutral, release brake, pull lever to 4L. DO NOT turn off 4x4 if in low ratio. To leave low ratio stop, neutral, brake off, select 4H.

There should be a number of discussions in the archives about this.

- (#5458) david miller, 9 Sep 02

david,
just curious, what happens if you de-select 4wd whilst in low ratio?
ed.

- (#5496) eddie arrowsmith, 10 Sep 02

you can't...
Or at least it'll lock you in 4L

- (#5497) david miller, 10 Sep 02