(Home) Bing (speed alert chime)

I have read the advice on how to unscrew it but am wary of all the warnings of the possible damage to the circuit board (which sounds like paper).
Could I just chop the wires and save a whole load of messing around?

- (#5630) Mike Hilton, 23 Sep 02

As long as you make sure the wires are fully insulated & won't come into contact with anything else you should be OK, but removing the screws isn't such a big deal, just turn slowly & ensure the PCB isn't rucking up underneath them & it shouldn't tear, then make sure the screws go back where they came from otherwise gauges may not work HTH Rob.

- (#5631) Rob Drinkwater, 24 Sep 02