hi, need a part number after MOT failure yesterday. not a major fail in view of age of car, but i want to make sure toyota get right bits.
it is the bush on the end of rear anti roll bar, where it meets the drop link,(both sides). looks about 3cm in diametre.
also, had rear drums off while i was looking, will need shoes soon, part number/ non-toyota alernative for these would be nice.

thanks folks!
ed.

- (#6894) eddie arrowsmith, 26 Jan 03

year and model please...

- (#6895) david miller, 26 Jan 03

Go to the Toyota dealer, get them to change to the import CD, then actually look at the diagram of what you need, that way you'll get the right thing, if I try to look it up, I risk getting the wrong part for you. Regards Rob.

- (#6896) Rob Drinkwater, 26 Jan 03

It's the rubber bobbin that the fork of the droplink fits around. Mine wore but I just packed them with a turn or two of insulating tape and pressed 'em back in...
90385-11021

rear shoes depend on year and 4x4 or 2x4.

- (#6897) david miller, 26 Jan 03

thanks david & rob!
should have known to put year/model on, oops!!
it's 1991 4wd.
it is the "bobbin" the fork fits round, don't think i'd get away with tape, though, it is badly gone ;-(
anyway, if that is all it can fail an mot on,i don't mind paying for the new ons.
thanks again.

- (#6898) eddie arrowsmith, 26 Jan 03

Eddie,
I have part No 90385-11021 for these bushes. However, they are not, in any way "special" and when I did mine, I made them up from old shock absorber bushes and pressed them in, but, if they are cheap enough, and available from your Toyota dealer, that would save a bit of work

- (#6899) John Davis, 27 Jan 03

They aren't expensive and available 2 day delivery. I mistakenly bought the bobbin bushes and the other type, all for about £20. Only used the bobbin type - pity.

- (#6974) Ian Dunse, 27 Jan 03