(Home) Hi clive (see message please) (Sp+)

hi clive,thanks 4all ur help so far.have looked 2c where wire goes but can't c any obvious place for it 2go.wire comes out of green connector from right hand side of distributor looking 2wards front of car.we think wire went 2an alarm on the immobiliser part.our space cruiser was running b4 this but now have no spark.also do u know where we would get manual 4it.we really need 1!!!sorry 2keep asking but u only 1 who has offered help.thank you

- (#8594) ros, 20 May 03 15:00

Hang on now. You're talking about a failure associated with an immobiliser? A diagram for the immobiliser would be a good start, no?
Anyway, according to any of my diagrams, there could be TWO black wires. One is the output to the tacho and aircon controller, but the other more interesting one is the supply from AM2/ IG2 on the ignition switch. No fuse, but a 30A fusible link...

- (#8595) david miller, 21 May 03 1:29

OK I've had a look in the manual. First what type of dizzy do you have (there are several)? At a guess you have a 11A type this has two connectors one with two leads and needs to be connected and one with one lead that is for servicing and hangs free.
The manual you want is Toyota Pub. No. RM017E.
Clive

- (#8596) Clive, 21 May 03 1:33

From what I can make out ...
Power lead brown from ignition switch fed from Fusible link AM2 - has this blown?
Tachometer lead may be black
Test lead blue.
Perhaps as Dave suggests it's an alarm problem.

- (#8597) Clive, 21 May 03 9:08