anyone have plans or diagram to make a table for the rear of a townie?

- (#9997) Russell, 29 Jul 03 15:28

Yes Thanks :o)

- (#9998) Martin Green, 29 Jul 03 16:12

I'm hoping to get some at the Ace Jam this weekend.
Happy to scan and mail them if there is no copyright involved.

- (#9999) Clive, 29 Jul 03 16:59

I would also be very interested in how where and price for table. How is it fixed in and can you take it out from time to time or once in does it stay in?.
Thanks Urgent going to france in 3wks and have 6 kids in the back not good A tv would be great do you know how to adapt the car to take electric.
Thanks

- (#10000) shirley, 30 Jul 03 17:06

Go to a caravan shop and get a table support and mount
one clips in to the other allso a leg thay will be too long so you will have to cut them down, then go to BandQ and get some conti board.
screw the grooved plastic (lip at the top)just under the windows between the two seats the other bit fits on the conti board, lift the other end up push lip in too groove lower down fit leg to the right hite.
job done.
regards
john

- (#10001) john, 2 Aug 03 17:53

I used an aluminium letter box cover. The lip along the edge is the perfect fit for a townie curtain rail. Try your local builders merchant or hardware store. Cut off teh rounded side that forms teh hings and fix it's flat side to a table top and leg as mentioned above

regards
carl

- (#10002) Carl Leroy-Smith, 7 Aug 03 10:23