Hi there, can anyone tell me the steps to remove the door trim ( inside cover)of a Townace 2CT diesel with power windows/lock.
thanks
Willie

- (#10588) Willie, 9 Sep 03 4:05

With the door fully open -
remove screw and lift out door closing/finger/wotnot thing, remove screw and wiggle of interior door handle surround, remove indoor light lens. Carefully prise off door card, note the only exposed one is the big one at the front, also NOTE that the plastic clips are very likely to be brittle and break. Once unclipped the card should be hanging by the top lip, just gently slide it up and over the lock plunger, and away it comes, but not too far as the electrics are still in place, just disconnect at the block and you are all done.
Main thing to remember is to take it slowly and gently!

- (#10589) Clive, 9 Sep 03 4:46