I Have A Townie Royal Lounge 1992 2.0L TD 2 Wheel Drive, I Can Not Find The Tracking Settings For It And My Local Tyre Shop Does Not Have The Settings For The Spacecruiser.
Help
- (#10644) John Reade, 4 Sep 03 1:07

Covered in a thread lower down I think and listed on AceAnswers

- (#10645) Ian Dunse, 4 Sep 03 6:47

No Good All That Is Mentioned In Any Article Is About CR 30 4WD, No Good For Me I've Got A 2WD Townie !! Anyone Help ??

- (#10646) John Reade, 4 Sep 03 14:36

Same as Spacecruiser which I believe is 0 degrees + or - 1 degree. My manual is on loan but will check when get it back.

- (#10647) Clive, 4 Sep 03 15:52

We tend to generally think that the settings for the 2WD Townace is based upon the SpaceCruiser and the US Vans but according to the respective manuals there are some slight discrepancies for the wheel alignment:

SpaceCruiser

Camber - 30' +/- 30' L to R error= <= 30'
Caster - 2deg 5' +/- 30' L to R error <=30'
Steering Axis inclination - 10deg +/- 30' L to R <=30'
Toe-in - 0 +/- 1mm

US Toyota Van

Camber - 5' +/- 30' L to R error= <= 30'
Caster - 2deg 30' +/- 30' L to R error <=30'
Steering Axis inclination - 10deg 35' +/- 30' L to R <=30'
Toe-in - 0 +/- 1mm

Which to choose? Think I would put my money on the SpaceCruiser values.
- (#10648) Ian Dunse, 5 Sep 03 3:58

Thanks for that Ian.
Got my + or - degs mixed up with mm (why mm?).
Still for basic tracking it's 0 deg and the same for US vans.
Please use a 4 wheel laser setup, not the old string and moles grips type.

- (#10649) Clive, 5 Sep 03 4:25