Im looking for a front crank shaft pulley for a 2.0 turbo townace, automatic. I've basically got a garage fitting a new time belt and in the process of trying to get the pulley off, the cast iron pulley has broke.any information will be good.Graham

- (#9269) Graham, 15 Mar 04 04:58

I trust the garage is paying? Common cause of breakage is failing to use the correct puller for removal...
You might have fun getting a s/h one, it's a common fault. New ones are £££. Need year, model code and whether fitted with aircon to order replacement.

- (#9269) david miller, 15 Mar 04 07:39

Graham. Is yours the older, single groove or the later double groove pulley? I might be able to help with a single groove type

- (#9269) John Davis (Leics), 15 Mar 04 09:02

Graham,
Pulley for 2ct with double belt alternator and air con all running on bottom pulley is about £190 from Toyota.
Check out the breakers in Exchange and Mart or Autocar. I got one delivered to NI from south England for about £90 including woodrift key, bolt and washer.
Would recommend you use a new bolt - about £2.50 from toyota. Toyota Camry uses the same pulleys.

- (#9269) stephen judge, 15 Mar 04 15:08

Sorry about the late reply, but I've getting the train to work and its takes forever, Once I find out which pulley it is I will let you know,cheers graham

- (#9269) GRAHAM, 16 Mar 04 14:58

there is a jap car breakers in manchester of junction 21 m62 called international car spares TEL: 0161 626 0752 they have a few townaces, and they supplied a bottom pulley for mine quite recently at a cost of £117.00 inc vat.
A lot cheaper than Toyota who wanted £190.00 plus vat.
hope this helps

- (#9269) chris, 24 Mar 04 13:42