hi
can someone please help i have bought a 1990 townace and would like to take out the radio/cd as it does not work. i have looked and looked but cannot see how they come out. please please someone help!!!!

- (#9450) frank, 21 Mar 04 09:44

Hello Frank.
First undo the two screws on the upper part of the front facia, just in front of the instrument cluster. Then gently ease it off at the bottom. Then you will have access to the screws that retain the remaining facia that covers the radio. Once that is off there are four screws on the bracket that holds the radio in place.

- (#9450) dave Bright (Bournemouth), 21 Mar 04 10:03

It is on Ace answers - two screws top of and just on front of the instrument cluster, they screw up wards. Then gently ease the whole surround forward, careful as the plastic bits may snap off if you try any twisting. May help to have steering wheel as low as possible as well.
Once removed, lower dash is removed much the same, and then you can remove the radio fixing screws and pull the lot out. If you have the cubby hole that is attached to side brackets on the radio.

- (#9450) Clive (Bristol), 21 Mar 04 10:08

thanks chaps ill give it a go..

- (#9450) frank, 22 Mar 04 12:28