After rebuilding my engine due to timing belt failure, I tried starting the engine but the main 80 amp fuse blew as soon as the ingition was switched on. I think I may have wrongly replaced the wires to the glow plugs. I have checked in the Ace archives & I think I have wired them correctly, the white & brown wire is earth on the fuel pipe clamp, 2 thick black wires on the inlet manifold with an insulator & 1 thin black wire out side of the insulator. Can anyone confirm this is correct before blow another fuse.
- (#10601) Arshad Mahmood, 2 May 04 11:16