(Home) Fan belt adjustment

After the fan belt on my Liteace 2ct started to squeel occasionally I removed the drivers seat to adjust it. I found the nut that tensions the belt loose. It does not apply any tension when screwed in the appropriate direction !! I can feel what appears to be a small block of metal on the underside of the tensionner but it's floating free. I assume it should be locked in place as the assembly must pivot against it, but I can't figure out to what !
Any suggestions would be appreciated.

- (#10824) stephen judge, 11 May 04 15:57

there's meant to be a bolt holding that block to the lug at the bottom of the alt IIRC, Stephen...

- (#10824) David Miller, 12 May 04 01:30