With finding replacement air filters going to be a challenge, I'm interested in going with a K&N or other cleanable/reusable filter.

Does anyone have any direct experience with either of the following K&N filters (for use in a 1989 CR30 TownAce 2.0TD 4x4 auto)

E-2360 (Rover 825TD)
H 160mm
ID 89mm
OD 137mm

E-2450 (Saab 99)
H 149mm
ID 92mm
OD 137mm

I'm inclined to try fitting the E-2360. Any alternatives that might be availalbe in N. America?

Cheers
Andrew

- (#11496) Andrew - Canmore, Alberta, Canada, 13 Jun 04 15:00

I fitted the Saab partnumber. It's a tiny bit short, but my original filter was a metal cased jobbie with sealing rings on the ends so I removed them and used'em on the K&N. I didn't have access to the Rover item to try it but it looks like it *might* be a better fit- could be too tall, might be to small in ID to fit the mounting points, but might just be perfect!

- (#11496) David Miller, 14 Jun 04 00:46

Just found this K&N part number: E-2361

E-2361 Product Specifications
Product Style: Round Air Filter
Height: 6.25 in (159 mm)
Inside Diameter: 3.5 in (89 mm)
Outside Diameter: 5.375 in (137 mm)

It's for a 1991 LAND ROVER ROVER 820 2.0L L4 - Non-US, 16v.

I think this might be the best fit - plan to order it on Monday, can report results after it arrives in a couple weeks - special order item over here.

Andrew

- (#11496) Andrew (Canadian Rockies), 4 Jul 04 10:03

For all the Guys and Girls who are running petrol 2.0 EFI Aces you can use the Fiat Brava K&N filter. I don't know the part number but it's a perfect fit and I have been running my Ace with one for the past 3 years without any problems.

- (#11496) Bill, 6 Jul 04 14:48