(Home) Turbo pipes

can any help have just changed my ct12 turbo but forgot to take note of pipe connections the 2 pipes from under the alternator 1 connects to nut flange on front of turbo and other goes to top of the oil filter ,the 2bolt flange underneath metalpipe then goes to rubber fits onto bottom of the sump,i have a flange on top of the turbo with 2 metal pipe tails which i guess are for the coolant but not sure were they go i have a bracket on the large turbo pipe which has a small pipe attached looking at it one end lines up with nipple on thermostat housing and the other lines up woth the top of the 2 on the turbo coolant tails, not sure were bott tail of the coolant flange joins to? also on top of the oil filter is another connection for what? can any one help thanks steve

- (#13795) steve, 16 Oct 04 06:59

I assume this is a 2CT engine and when you refer to the thermostat housing you mean the coolant outlet from the head. The thermostat is usually there but it's in the bottom hose the other side on a 2CT.

Yes that "bracket on the large turbo pipe" is fiddly. I can't recall enough to answer your question. There is a picture on Ace Answers that may help in Engine mechanical - "o Engine (2C-T) driver's side".

- (#13795) Dave Mason (Sussex), 18 Oct 04 03:27