John ( Davis)
In an earlier reply you mentioned a "sketch for a crankshaft pully removing tool. I would very much appreciate a copy.

- (#13841) gordon davies, 20 Oct 04 12:16

Gordon. Sketch and a couple of images emailed to you

- (#13841) John Davis (Leics), 20 Oct 04 15:19

The trick in the archives of taking off the PS pulley then sticking a longish socket against where the crankshaft bolt was, putting a bit of metal across the top of that and then puting the PS pulley back on and using a couple of cheap 8x70mm bolts worked perfectly for me. Alternatively you can get this http://www.machinemart.co.uk/product.asp?p=040210248 for less than a tenner.

- (#13841) Dave, 20 Oct 04 16:22

Lots of references in Ace Answers, Engine mechanical, Belts, " * Belts. Engine notes especially belts".

See also Engine mechanical, Pulleys.

- (#13841) Dave Mason (Sussex), 21 Oct 04 03:04