Hiya Guys,

I have the CM30 frame, and 2CT engine, got a problem with no heater front or rear, had new head gasket last year & new rad cores and thermostat.

Its been a right pain, missus keeps nagging me as she is cold (cant see why, I drive with the window open in all weathers <gg>)

Really appreciate some tech info (or wondering if the old girl needs to be put out of my misery?)
Just had to get a new exhaust for her, £300 gone bye bye :o(

Thanks, Jaice :o)

- (#2075) Jaice, 4 Jul 05 04:08

the front is controled by a valve under the front of the van, if you lay underneath and get some one to move the heat control you should see the cable and valve moving, if it moves you could have blocked pipes and will need to flush them though, the rear is on the bypass circuit and does block very esaly or it could be the control in the back has broken ie cable snapped. with both of these it is worth finding the hoses that feed the heaters and disconnect and flush though forwards and back to make sure they are clear.....hope this helps....

- (#2075) neil (torbay), 4 Jul 05 10:20